This wiki has been migrated to https://gitlab.com/wireshark/wireshark/-/wikis/home and is now deprecated. Please use that site instead.
Differences between revisions 3 and 4
Revision 3 as of 2005-02-07 16:38:12
Size: 2014
Editor: UlfLamping
Comment: add RFC1006 and spec titles
Revision 4 as of 2006-06-05 03:19:28
Size: 2018
Editor: localhost
Comment:
Deletions are marked like this. Additions are marked like this.
Line 16: Line 16:
XXX - Add example traffic here (as plain text or Ethereal screenshot). XXX - Add example traffic here (as plain text or Wireshark screenshot).
Line 18: Line 18:
== Ethereal == == Wireshark ==
Line 28: Line 28:
XXX - Add a simple example capture file to the SampleCaptures page and link from here. Keep it short, it's also a good idea to gzip it to make it even smaller, as Ethereal can open gzipped files automatically. XXX - Add a simple example capture file to the SampleCaptures page and link from here. Keep it short, it's also a good idea to gzip it to make it even smaller, as Wireshark can open gzipped files automatically.
Line 31: Line 31:
A complete list of TPKT display filter fields can be found in the [http://www.ethereal.com/docs/dfref/t/tpkt.html display filter reference] A complete list of TPKT display filter fields can be found in the [http://www.wireshark.org/docs/dfref/t/tpkt.html display filter reference]

ISO transport services on top of the TCP (TPKT)

"Emulate" ISO transport services ["COTP"] on top of ["TCP"]. The two major points missing in TCP (compared to ["COTP"]) are the TSAP addressing and the detection of packet boundaries on the receiving host. See the IsoProtocolFamily page for an overview.

History

As TCP becomes more and more popular (around 1995?), a mechanism was needed to encapsulate ISO services on top of TCP transport, as both protocols have similiar tasks and ["COTP"] was becoming obsolete these days.

Protocol dependencies

  • ["TCP"]: Typically, TPKT uses ["TCP"] as its transport protocol. The well known TCP port for TPKT traffic is 102.

Example traffic

XXX - Add example traffic here (as plain text or Wireshark screenshot).

Wireshark

The TPKT dissector is fully functional.

Preference Settings

* Wether TPKT packets spanning multiple TCP segments should be reassembled or not, for VoIP traffic this setting is essential.

Example capture file

XXX - Add a simple example capture file to the SampleCaptures page and link from here. Keep it short, it's also a good idea to gzip it to make it even smaller, as Wireshark can open gzipped files automatically.

Display Filter

A complete list of TPKT display filter fields can be found in the [http://www.wireshark.org/docs/dfref/t/tpkt.html display filter reference]

  • Show only the TPKT based traffic:

     tpkt 

Capture Filter

You can filter TPKT protocols while capturing, as it's always using TCP port 102.

  • Capture only the TPKT based traffic (you will only see TPKT, but not additions like the corresponding ARP packets):

     tcp port 102 

Discussion

TPKT (last edited 2008-10-06 17:16:31 by gadget00)