This wiki has been migrated to https://gitlab.com/wireshark/wireshark/-/wikis/home and is now deprecated. Please use that site instead.
Differences between revisions 12 and 14 (spanning 2 versions)
Revision 12 as of 2008-04-12 17:51:29
Size: 2087
Editor: localhost
Comment: converted to 1.6 markup
Revision 14 as of 2011-06-27 05:32:14
Size: 2429
Editor: WenchaoWang
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
XXX - add a brief STP description here The '''Spanning Tree Protocol''' ('''STP''') is a network protocolthat ensures a loop-free topology for any bridged Ethernet local area network.
Line 6: Line 6:
XXX - add a brief description of STP history STP is a Data Link Layer protocol. It is standardized as IEEE 802.1D. As the name suggests, it creates a spanning tree within a mesh network of connected layer-2 bridges (typically Ethernet switches), and disables those links that are not part of the spanning tree, leaving a single active path between any two network nodes.
Line 10: Line 10:
Line 11: Line 12:
XXX - Add example traffic here (as plain text or Wireshark screenshot). {{attachment:STP.JPG}}
Line 14: Line 15:
Line 18: Line 18:
Line 21: Line 22:
 * Data: PVID is 2 bytes      * Data: PVID is 2 bytes
Line 36: Line 35:
 stp }}}  stp
}}}
Line 40: Line 41:
 stp }}}  stp
}}}
Line 44: Line 47:

Spanning Tree Protocol (STP)

The Spanning Tree Protocol (STP) is a network protocolthat ensures a loop-free topology for any bridged Ethernet local area network.

History

STP is a Data Link Layer protocol. It is standardized as IEEE 802.1D. As the name suggests, it creates a spanning tree within a mesh network of connected layer-2 bridges (typically Ethernet switches), and disables those links that are not part of the spanning tree, leaving a single active path between any two network nodes.

Protocol dependencies

Example traffic

STP.JPG

Wireshark

The STP dissector is fully functional and supports IEEE 802.1D BPDU, Rapid Spanning-Tree BPDUs, and MST/MSTI BPDUs. Also add info of additional Wireshark features where appropriate, like special statistics of this protocol.

Cisco has a custom TLV extension called Per Vlan Spanning Tree (PVST+). The extension is added to 802.1D and RST BPDUs sent on 802.1Q VLAN trunks. The extension at the end of the BPDU advertises the VLAN ID (PVID) that the BPDU was sent on. The extension has the following format. It should be noted that only 802.1D and not RST BPDUs include the one padding byte for alignment.

  • Even byte padding (802.1D only): 1 byte
  • Type (only PVID type 0x00 is supported): 2 bytes
  • Length: 2 bytes
  • Data: PVID is 2 bytes

Preference Settings

There are no STP specific preference settings.

Example capture file

* SampleCaptures/stp.pcap

Display Filter

A complete list of STP display filter fields can be found in the display filter reference

  • Show only the STP based traffic:
     stp

Capture Filter

  • Capture only the STP based traffic:
     stp

Discussion

STP (last edited 2011-06-27 05:32:14 by WenchaoWang)