This wiki has been migrated to https://gitlab.com/wireshark/wireshark/-/wikis/home and is now deprecated. Please use that site instead.
Differences between revisions 1 and 12 (spanning 11 versions)
Revision 1 as of 2005-03-31 14:44:35
Size: 15
Editor: UlfLamping
Comment: redirect to STP page
Revision 12 as of 2008-04-12 17:51:29
Size: 2087
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
#REDIRECT STP ##language:en
= Spanning Tree Protocol (STP) =
XXX - add a brief STP description here

== History ==
XXX - add a brief description of STP history

== Protocol dependencies ==
 * [[LLC]]: Typically, STP uses [[LLC|802.2 LLC]] as its transport protocol, running on link-layer protocols in the LanProtocolFamily such as [[Ethernet]].
== Example traffic ==
XXX - Add example traffic here (as plain text or Wireshark screenshot).

== Wireshark ==

The STP dissector is fully functional and supports IEEE 802.1D BPDU, Rapid Spanning-Tree BPDUs, and MST/MSTI BPDUs. Also add info of additional Wireshark features where appropriate, like special statistics of this protocol.

Cisco has a custom TLV extension called Per Vlan Spanning Tree (PVST+). The extension is added to 802.1D and RST BPDUs sent on 802.1Q VLAN trunks. The extension at the end of the BPDU advertises the VLAN ID (PVID) that the BPDU was sent on. The extension has the following format. It should be noted that only 802.1D and not RST BPDUs include the one padding byte for alignment.
 * Even byte padding (802.1D only): 1 byte
 * Type (only PVID type 0x00 is supported): 2 bytes
 * Length: 2 bytes
 * Data: PVID is 2 bytes



== Preference Settings ==
There are no STP specific preference settings.

== Example capture file ==
* [[attachment:SampleCaptures/stp.pcap]]

== Display Filter ==
A complete list of STP display filter fields can be found in the [[http://www.wireshark.org/docs/dfref/s/stp.html|display filter reference]]

 . Show only the STP based traffic:
 {{{
 stp }}}
== Capture Filter ==
 . Capture only the STP based traffic:
 {{{
 stp }}}
== External links ==
 * IEEE 802.1D: [[http://standards.ieee.org/getieee802/download/802.1D-2004.pdf|IEEE standard for local and metropolitan area networks--Media access control (MAC) Bridges]] (for STP and RSTP).
 * IEEE 802.1Q: [[http://standards.ieee.org/getieee802/download/802.1Q-2003.pdf|IEEE Standards for local and metropolitan area networks-—Virtual Bridged Local Area Networks]] (for MSTP).
== Discussion ==

Spanning Tree Protocol (STP)

XXX - add a brief STP description here

History

XXX - add a brief description of STP history

Protocol dependencies

Example traffic

XXX - Add example traffic here (as plain text or Wireshark screenshot).

Wireshark

The STP dissector is fully functional and supports IEEE 802.1D BPDU, Rapid Spanning-Tree BPDUs, and MST/MSTI BPDUs. Also add info of additional Wireshark features where appropriate, like special statistics of this protocol.

Cisco has a custom TLV extension called Per Vlan Spanning Tree (PVST+). The extension is added to 802.1D and RST BPDUs sent on 802.1Q VLAN trunks. The extension at the end of the BPDU advertises the VLAN ID (PVID) that the BPDU was sent on. The extension has the following format. It should be noted that only 802.1D and not RST BPDUs include the one padding byte for alignment.

  • Even byte padding (802.1D only): 1 byte
  • Type (only PVID type 0x00 is supported): 2 bytes
  • Length: 2 bytes
  • Data: PVID is 2 bytes

Preference Settings

There are no STP specific preference settings.

Example capture file

* SampleCaptures/stp.pcap

Display Filter

A complete list of STP display filter fields can be found in the display filter reference

  • Show only the STP based traffic:
     stp 

Capture Filter

  • Capture only the STP based traffic:
     stp 

Discussion

STP (last edited 2011-06-27 05:32:14 by WenchaoWang)