Preferences/Protocols/SIMULCRYPT

Simulcrypt TCP port:

This allows the TCP port over which the Simulcrypt protocol applies. All TCP packets over the set TCP port will be decoded as Simulcrypt.

MIKEY ECM CA_system_ID(in hex):

If the ECM datagram follows MIKEY protocol, then setting the corresponding CA_system_ID here as a 2 byte hex value will automatically decode the ECM datagram as MIKEY. e.g. 0123 means for CA_system_ID 0x0123, ECM_datagrams are decoded as MIKEY.

Imported from https://wiki.wireshark.org/SIMULCRYPT_Preferences on 2020-08-11 23:24:43 UTC