This wiki has been migrated to https://gitlab.com/wireshark/wireshark/-/wikis/home and is now deprecated. Please use that site instead.
Differences between revisions 1 and 7 (spanning 6 versions)
Revision 1 as of 2004-09-14 10:52:37
Size: 1778
Editor: UlfLamping
Comment: add first content
Revision 7 as of 2004-10-07 21:12:29
Size: 3768
Editor: GuyHarris
Comment: "well-known" is usually hyphenated. Ask about IPv6.
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
The Internet Protocol provides the network layer (layer 3) functionality in the TCP/IP protocol suite. The Internet Protocol provides the network layer (layer 3) transport functionality in the InternetProtocolFamily.

The IP protocol is used to transfer packets from one ["IP-address"] to another. The user of this layer will give a packet and a remote IP address, and IP is responsible to transfer the packet to that host.

IP will (hopefully) guide the packet the right way to the remote host. The data transfer is independant of the underlying network hardware (e.g. ["ATM"], ["Ethernet"], or even a SerialLine). If the underlying hardware is not able to transfer the maximum length required (especially on SerialLine's or ["ATM"]), IP will split the data into several smaller IP fragments and reassemble it into a complete one at the receiving host.

When IP wants to send a packet on a LAN, it must first translate the ["IP-address"] given into the underlying hardware address (e.g. an ["Ethernet"] address). IP uses ["ARP"] for this translation, which is done dynamically. On a point-to-point line, this is obviously not necessary, as there's only one host to which a given machine can send a packet.

IP doesn't provide any mechanism to detect PacketLoss, DuplicatePackets and alike.

IP uses ["ICMP"] to transfer control messages to a remote host, like: "Please don't send me more IP packets, I'm full". The famous ping tool also use ["ICMP"].

The typical protocols on top of IP are ["TCP"] and ["UDP"].

Version 4 of the IP protocol is widely used all over the world. As the available ["IP-address"] range is becoming short, version 6 with a much wider address range is becoming more and more popular these days.
Line 8: Line 22:
XXX - add a brief description of IP history The [http://www.ietf.org/rfc/rfc791.txt RFC791] "INTERNET PROTOCOL" was released in September 1981.
Line 12: Line 26:
 * ["Ethernet"]: IP can use ["Ethernet"] and many other protocols. The well known Ethernet type for IP is 0x800.  * ["Ethernet"]: IP can use ["Ethernet"] and many other protocols. The well-known Ethernet type for IP is 0x800.
Line 21: Line 35:
IP dissector is fully functional. Also add info of additional Ethereal features where appropriate, like special statistics of this protocol. IP dissector is fully functional. Ethereal provides some advanced features such as IP defragmentation.
Line 50: Line 64:
 * add link to IP specification and where to find additional info on the web about IP  * [http://www.ietf.org/rfc/rfc791.txt RFC791] "INTERNET PROTOCOL"
 * [http://www.ietf.org/rfc/rfc894.txt RFC894] "Transmission of IP Datagrams over Ethernet Networks"
 * [http://www.ietf.org/rfc/rfc950.txt RFC950] "Internet Standard Subnetting Procedure"
 * [http://www.ietf.org/rfc/rfc1112.txt RFC1112] "Host Extensions for IP Multicasting"
 * [http://www.ietf.org/rfc/rfc1812.txt RFC1812] "Requirements for IP Version 4 Routers"
Line 53: Line 71:

Add more stuff about IPv6 here, or have separate IPv4 and IPv6 pages? -''Guy Harris''

Internet Protocol (IP)

The Internet Protocol provides the network layer (layer 3) transport functionality in the InternetProtocolFamily.

The IP protocol is used to transfer packets from one ["IP-address"] to another. The user of this layer will give a packet and a remote IP address, and IP is responsible to transfer the packet to that host.

IP will (hopefully) guide the packet the right way to the remote host. The data transfer is independant of the underlying network hardware (e.g. ["ATM"], ["Ethernet"], or even a SerialLine). If the underlying hardware is not able to transfer the maximum length required (especially on SerialLine's or ["ATM"]), IP will split the data into several smaller IP fragments and reassemble it into a complete one at the receiving host.

When IP wants to send a packet on a LAN, it must first translate the ["IP-address"] given into the underlying hardware address (e.g. an ["Ethernet"] address). IP uses ["ARP"] for this translation, which is done dynamically. On a point-to-point line, this is obviously not necessary, as there's only one host to which a given machine can send a packet.

IP doesn't provide any mechanism to detect PacketLoss, DuplicatePackets and alike.

IP uses ["ICMP"] to transfer control messages to a remote host, like: "Please don't send me more IP packets, I'm full". The famous ping tool also use ["ICMP"].

The typical protocols on top of IP are ["TCP"] and ["UDP"].

Version 4 of the IP protocol is widely used all over the world. As the available ["IP-address"] range is becoming short, version 6 with a much wider address range is becoming more and more popular these days.

History

The [http://www.ietf.org/rfc/rfc791.txt RFC791] "INTERNET PROTOCOL" was released in September 1981.

Protocol dependencies

  • ["Ethernet"]: IP can use ["Ethernet"] and many other protocols. The well-known Ethernet type for IP is 0x800.
  • ["ICMP"]: IP uses ["ICMP"] for control messages between hosts.

Example traffic

XXX - Add example traffic here (as plain text or Ethereal screenshot).

Ethereal

IP dissector is fully functional. Ethereal provides some advanced features such as IP defragmentation.

Preference Settings

(XXX add links to preference settings affecting how IP is dissected).

Example capture file

XXX - Add a simple example capture file. Keep it short, it's also a good idea to gzip it to make it even smaller, as Ethereal can open gzipped files automatically.

Display Filter

A complete list of IP display filter fields can be found in the [http://www.ethereal.com/docs/dfref/i/ip.html display filter reference]

  • Show only the IP based traffic (beware: you won't see any ARP packets, if you use this filter!):

     ip 

    Show only the IP based traffic to or from host 192.168.0.10:

     ip.addr==192.168.0.10 

    Show only the IP based traffic not to or from host 192.168.0.10 (beware: this is not identical to ip.addr!=192.168.0.10):

     !(ip.addr==192.168.0.10) 

Capture Filter

  • Show only the IP based traffic to or from host 192.168.0.10:

     host 192.168.0.10 

Discussion

Add more stuff about IPv6 here, or have separate IPv4 and IPv6 pages? -Guy Harris

Internet_Protocol (last edited 2018-10-09 12:21:34 by AlexHammer)