Bearer Independent Call Control (BICC)
This Recommendation describes the adaptation of the narrow-band ISDN User Part (ISUP) for the support of narrow-band ISDN services independent of the bearer technology and signalling message transport technology used.
History
ITU-T Recommendation Q.1901 was prepared by ITU-T Study Group 11 (1997-2000) and approved under the WTSC Resolution 1 procedure on 15 June 2000.
Protocol dependencies
- MTP3: Typically, BICC uses MTP3 as its transport protocol. The service indicator BICC uses is 13.
Example traffic
XXX - Add example traffic here (as plain text or Wireshark screenshot).
Wireshark
The BICC dissector is fully functional.
Preference Settings
(XXX add links to preference settings affecting how BICC is dissected).
Example capture file
Display Filter
A complete list of BICC display filter fields can be found in the display filter reference
Show only the BICC based traffic:
bicc Capture Filter
You cannot directly filter BICC packets while capturing. However, in case BICC runs over SCTP/M3UA/MTP3 you could filter SCTP traffic using IP proto 0x84:
ip proto 0x84 or, in newer versions of libpcap:
ip proto sctp External links
Discussion
Imported from https://wiki.wireshark.org/BICC on 2020-08-11 23:11:32 UTC