UDLD is a Cisco Layer 2 protocol to detect a uni-directional fiber link between two Ethernet switches in order to prevent a looped network. UDLD is often used in switched Ethernet networks where Spanning-Tree is required to block one or more ports to prevent a loop from forming.
UDLD was originally developed for the Cisco Catalyst 5000 series switches.
- Ethernet: UDLD uses Ethernet as its transport protocol using destination mac address 0100.0CCC.CCCC.
UDLD support was added in Wireshark 0.99.4.
There are no preference settings at the present time.
Show only UDLD packets:
A complete list of display filters can be found in the Display Filter Reference.
You cannot directly filter UDLD protocols while capturing. However, if you use the Ethernet destination MAC address (see above), you can filter on that one:
ether dst 01:00:0c:cc:cc:cc
- RFC 5171 Informational UniDirectional Link Detection (UDLD) Protocol RFC
The originally stated sample capture was void, so please add the udld.pcap capture to the SampleCaptures page.
Imported from https://wiki.wireshark.org/UDLD on 2020-08-11 23:26:59 UTC