This wiki has been migrated to and is now deprecated. Please use that site instead.

Trivial File Transfer Protocol (TFTP)

TFTP is used to transfer files in a very simple way.

Compared to other file transfer protcols (like: FTP or HTTP), TFTP is much simpler (and much smaller in code size) and therefore easier to implement. Because of this, it's often used in embedded devices (e.g. thin clients) to get files from a server at bootup time (typically in conjunction with BOOTP).

Sometimes TFTP is also used to upload firmware files from the user to an embedded device, but as these devices become more and more advanced, HTTP is more often used for this purpose today.


XXX - add a brief description of TFTP history

Protocol dependencies

Example traffic


The TFTP dissector is fully functional.

Preference Settings

There are no TFTP specific preference settings.

Example capture file

Display Filter

A complete list of TFTP display filter fields can be found in the display filter reference

Capture Filter

You cannot directly filter TFTP protocols while capturing. However, if you know the UDP port used (see above), you could filter on that one; however, as a TFTP server will choose a unique port number from which to send the reponse, and will send it to the port number from which the request came, which is not likely to be a well known port number, a filter checking for UDP port 69 will capture only the initial TFTP request, not the response to that request or any subsequent packets in that TFTP conversation.


TFTP (last edited 2018-10-09 12:31:01 by AlexHammer)