SMB2/GetInfo

SMB2/GetInfo

Opcode 0x10

This SMB2 command can be used to get information about files and other types of objects from the server.

SMB2/GetInfo Request

SMB2/GetInfo Request Packet Format

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|          Buffer Code          |   InfoClass   |   Infolevel   |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                   Max Response Buffer Size                    |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
+-+-+-+-+                                               +-+-+-+-+
|                                                               |
+-+-+-+-+                   Parameters                  +-+-+-+-+
|                                                               |
+-+-+-+-+                                               +-+-+-+-+
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
+-+-+-+-+                      FID                      +-+-+-+-+
|                                                               |
+-+-+-+-+                                               +-+-+-+-+
|                                                               |
+-+-+-+-+                                               +-+-+-+-+
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Buffer Code

SMB2/BufferCode 0x29 = 0x28 | 0x01 (but why? where's the dynamic part?)

InfoClass

Infoclass specifies what type of object we want information about.

0x01     SMB2_CLASS_FILE_INFO
0x02     SMB2_CLASS_FS_INFO
0x03     SMB2_CLASS_SEC_INFO

InfoLevel

Infolevel together with Infoclass specify a specific type of information to be returned.

Infolevels for SMB2_CLASS_FILE_INFO

Infolevels for SMB2_CLASS_FS_INFO

Infolevels for SMB2_CLASS_SEC_INFO

Max Response Buffer Size

This field specifies the maximum amount of data that the server can send back in the response. If the response is truncated the server will set the NT Status Code STATUS_BUFFER_OVERFLOW

Parameters

A block of 16 bytes with extra parameters specific to the class/infolevel.

FID

SMB2/FID Identifier for the object to get the info from.

SMB2/GetInfo Response

SMB2/GetInfo Response Packet Format

If STATUS_SUCCESS or STATUS_BUFFER_OVERFLOW
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           Buffer Code           |    Response Buffer Offset   |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|               Response Buffer Size (16 or 32 bit?)            |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|    Data depending of Infoclass/Infolevel in the request
+-+-+-+-+...


if STATUS_BUFFER_TOO_SMALL
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           Buffer Code           |            0x0000           |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                   Response Buffer Size == 4                   |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                       Required Buffer Size                    |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


if STATUS_INVALID_PARAMETER or STATUS_INVALID_INFO_CLASS or 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           Buffer Code           |            0x0000           |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                            0x00000000                         |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Buffer Code

SMB2/BufferCode 0x09 = 0x08 | 0x01

Response Buffer Size

The number of bytes of returned data that follows.

NT Status Codes

Discussion

Some of the 16 bytes between maxresponsebuffersize and the fid in the request holds data specific to the class/level used and will alter what kind of data is returned. Bytes 8-11 have been seen to definitely fall in this range. but it could be bytes 4-15 or even all of them. This blob should be documented on the corresponding class/level page.

Examples

Here is a capture of a scanner trying every SMB2 getinfo level. The file being queried had the following settings:

scan-getinfo.dat:
        create_time:    Thu Aug 10 09:11:44 2006 EST
        access_time:    Fri May 12 09:11:44 2006 EST
        write_time:     Sat Feb 11 10:11:44 2006 EST
        change_time:    Sun Nov 13 10:08:13 2005 EST
        attrib:         0x20
        alloc_size:     8
        size:           7
        nlink:          1
        delete_pending: 0
        directory:      0
        ea_size:        41
        fname:          '\test\scan-getinfo.dat'

Here is a capture of running the SMB2-GETINFO and SMB2-SETINFO smbtorture tests. This demonstrates working with EAs, ACLs and many getinfo and setinfo levels.


Imported from https://wiki.wireshark.org/SMB2/GetInfo on 2020-08-11 23:25:00 UTC