As of Wireshark 3.2.6 -
Wireshark will try to determine which type of device the SCSI session is operating on, and thus which set of commands are being used by inspecting SCSI PDUs such as Inquiry.
This is not foolproof and will for example not work at all if these Inquiry PDUs are missing from the capture.
Using this preference setting it is possible to tell Wireshark which commandset to assume the SCSI PDUs belong to and how the PDUs are to be dissected for those cases.
The SCSI dissector in wireshark currently only handles some of the commandsets for SCSI. Some of the supported commandsets are SBC (harddisks) SSC (tapedrives) MMS (cdrom) and OSD (object based storage).
Decode SCSI Messages As
Imported from https://wiki.wireshark.org/SCSI_Preferences on 2020-08-11 23:24:29 UTC