SABP

Service Area Broadcast Protocol (SABP)

History

SABP is an 3GPP specification used to signal betwen CN (Core Network) and RNC (Radio Network Controller).
It informes the RNC which cells it should transmitt cell broadcast messages (messages that are sent out
to every listener in an 3G cell).
SABP shall use the ASN.1 Basic Packed Encoding Rules (BASIC-PER) Aligned Variant as transfer syntax.

The following messages are specified.

WRITE-REPLACE
This message is sent by the CN to the RNC

WRITE-REPLACE COMPLETE
This message will be sent by the RNC to the CN in a successful response to a WRITE-REPLACE message.

WRITE-REPLACE FAILURE
This message will be sent by the RNC to the CN as an unsuccessful response to a WRITE-REPLACE message

KILL
This message is sent by the CN to the RNC to stop broadcasting of a specific message.

KILL COMPLETE
This message is sent by the RNC to the CN as a successful response to a KILL message.

KILL FAILURE This message is sent by the RNC to the CN as unsuccessful response to a KILL message.

LOAD QUERY
This message is sent by the CN to the RNC to gain an indication of broadcast resources available.

LOAD QUERY COMPLETE
This message will be sent by the RNC as a successful response to the LOAD QUERY message.

LOAD QUERY FAILURE
This message is sent by the RNC to the CN as an unsuccessful response to a LOAD QUERY message.

MESSAGE STATUS QUERY
This message is sent by the CN to the RNC to obtain the current status of a Service Area broadcasting message.

MESSAGE STATUS QUERY COMPLETE
This message is sent by the RNC to the CN as a successful response to a MESSAGE QUERY message.

MESSAGE STATUS QUERY FAILURE
This message is sent by the RNC to the CN in an unsuccessful response to a MESSAGE QUERY message.

RESET
The message is sent by the CN to the RNC to request that the RNC end broadcasting in one or more Service Areas.

RESET COMPLETE
This message is sent from the RNC to the CN as a successful response to a RESET message where indicated Service-Area(s) are now not broadcasting any messages.

RESET FAILURE
This message is sent from the RNC to the CN as an unsuccessful response to a RESET message to indicate that a Service Area broadcasting related problem exists in one or more of its Service Areas.

RESTART
This message is sent from the RNC to the CN to indicate a Service Area broadcasting related restart situation in one or more of its Service-Areas.

FAILURE
This message is sent from the RNC to the CN to indicate that a Service Area broadcasting related problem exists in one or more of its Service-Areas.

ERROR INDICATION
This message is sent by the RNC to CN and is used to indicate that some errors have been detected in the node.

Protocol dependencies

Example traffic

Wireshark

the dissector is generated using asn2wrs. SABP is available from WS 0.99.8 but can only be called by name. In the next release (available as a development build) SABP over TCP will be dissected.

Preference Settings

Example capture files

Add capture file

Display Filter

A complete list of SABP display filter fields can be found in the display filter reference

Show only the SABP based traffic:

 sabp 

Capture Filter

External links

Discussion


Imported from https://wiki.wireshark.org/SABP on 2020-08-11 23:24:18 UTC