This wiki has been migrated to and is now deprecated. Please use that site instead.


RADIUS is a protocol for remote user authentication (and authorization?) and accounting. Its primary use is for Internet Service Providers, though it may as well be used on any network that needs a centralized authentication and/or accounting service for its workstations.

RADIUS is often used in larger ["Wi-Fi"] (wireless) networks for authentication purposes, replacing the simple shared key methods which are uncomfortable if a Wi-Fi network reaches a specific size.

The ["DIAMETER"] protocol is the designated successor, but RADIUS is still commonly used today.


XXX - add a brief description of RADIUS history

Protocol dependencies

Example traffic

XXX - Add example traffic here (as plain text or Wireshark screenshot).


RADIUS dissector is fully functional.

Preference Settings

Shared Secret

 radius.shared_secret  If not empty it will try to use the string given to decrypt encrypted AVPs (password)

Radius Dictionary

Since version 0.10.12 the Radius dissector will try to load protocol information (Vendors, Atrributes and Values) from the dictionary located in the radius directory of either the user's directory or the defaults directory.

#  The format of the dictionary (and the default dictionary)
#  is a subset of of FreeRADIUS'.
#  Valid data types for attributes are:
#       string  - 0-253 octets
#       ipaddr  - 4 octets in network byte order
#       integer - 32 bit value in big endian order (high byte first)
#             (wireshark uses this type for non-standard 1-2-3 and 8 byte integers as well)
#       date    - 32 bit value in big endian order - seconds since
#                                       00:00:00 GMT,  Jan.  1,  1970
#       ifid    - 8 octets in network byte order
#       ipv6addr   - 16 octets in network byte order
#       ipv6prefix - 18 octets in network byte order
#       octets  - raw octets, printed as hex strings

# include another dictionary file from this directory

VENDOR  Cosine  3085
VENDOR  Cisco   9

ATTRIBUTE  Cosine-Connection-Profile-Name       1 string
ATTRIBUTE  Cosine-VPI-VCI                 5 octets
ATTRIBUTE  Cosine-DLCI                    6 integer

# standard avps
ATTRIBUTE  User-Name            1 string

# encrypted avps 
ATTRIBUTE  Password             2 string encrypt=1

# avps with tag 
ATTRIBUTE  Tunnel-Type          64 integer has_tag
ATTRIBUTE  Tunnel-Password      69 string has_tag,encrypt=2

# single vendor avps 
ATTRIBUTE Cisco-Disconnect-Cause 195 integer Cisco

# Values are declared
VALUE  Tunnel-Type  PPTP     1
VALUE  Tunnel-Type  L2F      2
VALUE  Tunnel-Type  L2TP     3
VALUE  Tunnel-Type  ATMP     4
VALUE  Tunnel-Type  VTP      5
VALUE  Tunnel-Type  AH       6
VALUE  Tunnel-Type  IP       7
VALUE  Tunnel-Type  MIN-IP   8
VALUE  Tunnel-Type  ESP      9
VALUE  Tunnel-Type  GRE      10
VALUE  Tunnel-Type  DVS      11
VALUE  Tunnel-Type  IP-in-IP 12
VALUE  Tunnel-Type  VLAN     13

Example capture file

XXX - Add a simple example capture file. Keep it short, it's also a good idea to gzip it to make it even smaller, as Wireshark can open gzipped files automatically.

Display Filter

A complete list of RADIUS display filter fields can be found in the [ display filter reference]

Capture Filter

You cannot directly filter RADIUS protocols while capturing. However, if the RADIUS traffic is using one or more of the standard ["UDP"] ports (see above), you can filter on that port or ports.

RADIUS servers

See RadiusServers for information about various RADIUS server distributions.