This wiki has been migrated to and is now deprecated. Please use that site instead.

Reliable Transfer Service Element (RTSE)

The Reliable Transfer Service Element supports application that which to transfer large amounts of data and do not wish to restart the transfer from scratch if the connection fails before the transfer is complete.

X411 always runs over RTSE, whilst DISP can optionally be run over RTSE.


RTSE was originally developed as part of the X.400 standards (X.410), which oftens transmits large messages. It was then extracted as a common core application service.

Protocol dependencies

Example traffic

XXX - Add example traffic here (as plain text or Wireshark screenshot).


The RTSE dissector is fully functional though it is has only been exercised with the X411 dissector to date.

Preference Settings

There are no preference settings specific to RTSE but you might want to enable reassembly of those transport protocols that are used below RTSE. Specifically, COTP reassembly.

Example capture file

The following sample capture files show show RTSE being used by X.400 (X411).

Display Filter

A complete list of RTSE display filter fields can be found in the display filter reference

Capture Filter

You cannot directly filter PROTO protocols while capturing. However, if you know the COTP port used, you can filter on that one.


RTSE (last edited 2008-04-12 17:51:29 by localhost)