Encrypted UDP based FTP with multicast (UFTP)
UFTP is an encrypted multicast file transfer program, designed to securely, reliably, and efficiently transfer files to multiple receivers simultaneously. This is useful for distributing large files to a large number of receivers, and is especially useful for data distribution over a satellite link (with two way communication), where the inherent delay makes any TCP based communication highly inefficient. The multicast encryption scheme is based on TLS with extensions to allow multiple receivers to share a common key. UFTP also has the capability to communicate over disjoint networks separated by one or more firewalls (NAT traversal) and without full end-to-end multicast capability (multicast tunneling) through the use of a UFTP proxy server. These proxies also provide scalability by aggregating responses from a group of receivers.
UFTP was created by Dennis Bush somewhere in 2005, its Version 1.1 appeared 8/15/2005. Version 2.0 appeared 5/4/2006. Version 3.0 appeared 3/11/2010, adding SSL derived encryption. Version 4.0 appeared 4/27/2013, adding IPv6 support.
Frame 12: 82 bytes on wire (656 bits), 82 bytes captured (656 bits) on interface 0 Ethernet II, Src: e2:e4:de:0e:37:0a (e2:e4:de:0e:37:0a), Dst: IPv4mcast_04:04:01 (01:00:5e:04:04:01) Internet Protocol Version 4, Src: 10.0.0.1 (10.0.0.1), Dst: 18.104.22.168 (22.214.171.124) User Datagram Protocol, Src Port: 37173, Dst Port: 1044 UDP based FTP w/ multicast V4 Protocol Version: 0x40 Type: ANNOUNCE (1) Sequence Number: 4 Source ID: 0x0a000001 Group ID: 0x96f4c304 Group Instance ID: 0 Group Round Trip Time: 0,532215785796568 Group Size: 0 Reserved: 0x00 ANNOUNCE Type: ANNOUNCE (1) Header Length: 6 Flags: 0x00 Robustness Factor: 20 Congestion Control Type: NONE (0) Reserved: 0 Block Size: 1300 Timestamp: Aug 6, 2016 21:52:35.000364573 UTC Public Multicast Address: 126.96.36.199 (188.8.131.52) Private Multicast Address: 184.108.40.206 (220.127.116.11)
The UFTP dissector is fully functional, for both version 3 and 4 of the protocol.
This dissector has no preferences to set.
Example capture file
A complete list of UFTP display filter fields can be found in the display filter reference
Show only the UFTP based traffic:
You cannot directly filter UFTP protocols while capturing. However, if you know the UDP port used (see above), you can filter on that one.
Capture only the UFTP traffic over the default port (1044):
udp port 1044
http://uftp-multicast.sourceforge.net/ UFTP - Encrypted UDP based FTP with multicast