The transmission format defined by IEEE C37.118 for reporting synchronized phasor measurements in power systems.
- TCP, UDP: Synchrophasors use TCP or UDP as transport protocol. The (not IANA registered) ports listed in the standard are 4712 for TCP and 4713 for UDP.
The Wireshark dissector decodes synchrophasor frames as defined by IEEE C37.118-2005. Where the standard is ambiguous, the recommendations by the Power System Relaying Committee WG H11 are used. The dissectors tries to find the correct configuration frames and uses them to decode the data streams.
C37.118_1PMU_TCP.pcap - One PMU (Phasor Measurement Unit) reporting synchrophasors over TCP.
C37.118_1PMU_UDP.pcap - One PMU reporting synchrophasors over UDP.
C37.118_2PMUsInSync_TCP.pcap - Two PMU sending synchrophasor data at the same time.
C37.118_4in1PMU_TCP.pcap - Four data streams from a PDC (Phasor Data Concentrator).
A complete list of synchrophasor display filter fields can be found in the display filter reference.
Imported from https://wiki.wireshark.org/IEEE%20C37.118 on 2020-08-11 23:15:00 UTC