|Deletions are marked like this.||Additions are marked like this.|
|Line 8:||Line 8:|
|* ["M3UA"]: MEGACO can use ["M3UA"] as its transport protocol; if M3UA is used there is an indication in the M3UA part that this is MEGACO.||* ["M3UA"]: MEGACO can use ["M3UA"] as its transport protocol; MEGACO is indicated in M3UA by a Protocol user id of 14.|
|Line 28:||Line 28:|
|* Something else||* Wether to display tree dissection or not.|
Media Gateway Control Protocol (MEGACO/H.248.1)
MEGACO is used to control a Media Gateway in a VoIP system. MEGACO can be Text or Binary (ASN.1) encoded.
- ["M3UA"]: MEGACO can use ["M3UA"] as its transport protocol; MEGACO is indicated in M3UA by a Protocol user id of 14.
- ["SCTP"]: Typically(?) MEGACO uses ["SCTP"] as its transport protocol; MEGACO is indicated in SCTP by a payload protocol ID of 7.
- ["TCP"]: MEGACO can use ["TCP"] as its transport protocol. The well known TCP port for MEGACO traffic is 2944; if TCP is used, a TPKT header must be included.
- ["UDP"]: MEGACO can use ["UDP"] as its transport protocol. The well known UDP port for MEGACO traffic is 2944
XXX - Add example traffic here (as plain text or Ethereal screenshot).
The MEGACO dissector works for TEXT encoding of the protocol if EOL is used as SEParator. Dissection of binary encoding has recently been added (2004-10-25) as a separate dissector, but is currently only working if M3UA is used as transport.
- If TCP is used there may be issues with desegmentation; such traces would be valuable.
- You can change the PORTS on which MEGACO is dissected for UDP/TCP
- Raw text output can be selected
- Wether to display tree dissection or not.
Example capture file
XXX - Add a simple example capture file to the SampleCaptures page and link from here. Keep it short, it's also a good idea to gzip it to make it even smaller, as Ethereal can open gzipped files automatically.
A complete list of MEGACO display filter fields can be found in the [http://www.ethereal.com/docs/dfref/MEGACO/MEGACO.html display filter reference]
Show only the MEGACO based traffic:
You cannot directly filter MEGACO protocols while capturing. However, if you know the ["TCP"] or ["SCTP"] port used (see above), you can filter on that one.
- add link to MEGACO specification and where to find additional info on the web about MEGACO
[http://www.ietf.org/rfc/rfc3015.txt?number=3015 RFC3015]: MEGACO version 1