converted to 1.6 markup
|Deletions are marked like this.||Additions are marked like this.|
|Line 16:||Line 16:|
|* ["GARP"]: GVRP uses ["GARP"] as its transport protocol.||* [[GARP]]: GVRP uses [[GARP]] as its transport protocol.|
|Line 35:||Line 35:|
|A complete list of GVRP display filter fields can be found in the [http://www.wireshark.org/docs/dfref/g/gvrp.html display filter reference]||A complete list of GVRP display filter fields can be found in the [[http://www.wireshark.org/docs/dfref/g/gvrp.html|display filter reference]]|
|Line 51:||Line 51:|
| * IEEE 802.1D: [http://standards.ieee.org/getieee802/download/802.1D-2004.pdf IEEE standard for local and metropolitan area networks--Media access control (MAC) Bridges].
* IEEE 802.1Q: [http://standards.ieee.org/getieee802/download/802.1Q-2003.pdf IEEE Standards for Local and metropolitan area networksVirtual Bridged Local Area Networks].
| * IEEE 802.1D: [[http://standards.ieee.org/getieee802/download/802.1D-2004.pdf|IEEE standard for local and metropolitan area networks--Media access control (MAC) Bridges]].
* IEEE 802.1Q: [[http://standards.ieee.org/getieee802/download/802.1Q-2003.pdf|IEEE Standards for Local and metropolitan area networksVirtual Bridged Local Area Networks]].
GARP VLAN Registration Protocol (GVRP)
GVRP stands for GARP (Generic Attribute Registration Protocol) VLAN Registration Protocol. It's a Layer 2 network protocol, for automatic configuration of switches in a VLAN network.
Each VLAN switch is configured with the VLANs it is part of. GVRP will spread this information and configure the needed VLANs.
So to add a switch to a VLAN, only 1 switch needs to be reconfigured. This is not the case within a standard VLAN, where all switches might need reconfiguration.
XXX - add a brief description of GVRP history
XXX - Add example traffic here (as plain text or Wireshark screenshot).
The GVRP dissector is (fully functional, partially functional, not existing, ... whatever the current state is). Also add info of additional Wireshark features where appropriate, like special statistics of this protocol.
There are no GVRP specific preference settings.
Example capture file
XXX - Add a simple example capture file to the SampleCaptures page and link from here. Keep it short, it's also a good idea to gzip it to make it even smaller, as Wireshark can open gzipped files automatically.
A complete list of GVRP display filter fields can be found in the display filter reference
Show only the GVRP based traffic:
You cannot directly filter GVRP protocols while capturing. However, GVRP packets are sent to the MAC address 01:80:C2:00:00:21, so you can filter on that.
Capture GVRP traffic:
ether dst 01:80:c2:00:00:21
XXX - filter on the LLC DSAP used for STP? Or just do "stp and"?