Fibre Channel Over Ethernet (FCoE)
Fibre Channel over Ethernet (FCoE) is a proposed mapping of Fibre Channel over selected full duplex IEEE 802.3 networks.
This protocol proposal is led by Cisco and is under discussion in the T11 FC-BB Working group.
- ["Ethernet"]: FCoE uses ["Ethernet"] as its transport protocol. The IEEE-assigned Ethertype for FCoE traffic is 0x8906.
The FCoE dissector is fully functional.
Example capture file
- Show only the FCoE based traffic:
fcoeShow only FCoE traffic with start-of-frame value SOFn3:
fcoe.sof == SOFn3Show only FCoE traffic with bad CRCs:
fcoe.crc_bad == True
- Capture only the FCoE traffic over the standard Ethertype (0x8906):
eth.type == 0x8906
http://fcoe.com - Primary site for FCoE information.
http://www.t11.org/ftp/t11/pub/fc/bb-5/07-479v0.pdf - presentation describing frame format.